Protect Your Home From Wildfire

Professional fire-resistant coating for BC homes — applied by hand, reusable through multiple heat events, and built on the same Home Ignition Zone thinking behind FireSmart BC. We're bringing homeowner wildfire protection, proven for years in California, home to the Fraser Valley and Okanagan.

THE RISK | BRITISH COLuMBIA

The fire does't have to reach you to reach your home

Most homes lost to wildfire aren't consumed by a wall of flame. They're ignited by embers — carried on the wind, landing on a dry roof or in an open vent long before the fire front arrives. That's the threat professional coating is built for.

2.84M Hectares in 2023

BC's 2023 season burned more than 2.84 million hectares — more than double any previous year on record. Even the "quieter" 2024 and 2025 seasons ran well above the 10-year average.

2 km ember travel distance

Wind-blown embers can travel up to two kilometres ahead of a fire. A home nowhere near the tree line can still catch — which is why "I'm not in the forest" isn't the safety margin people think it is.

~6 min to pass through a property

A wildfire can move through a residential property in as little as six to eight minutes. There's no time to react once it arrives — the protection that saves a home is the protection already in place before the fire reaches it.

Services | what we do

One assessment, A plan built around your home

Every property carries risk differently — a hillside acreage in the Okanagan isn't a townhouse in the Valley. We start with a walk-through, then build protection in layers. Coating is the core; everything else is added only where your home actually needs it.

Fire resistant coating application

Professional, hand-applied treatment for the surfaces that decide whether an ember takes hold — roof, siding, eaves, decks, and exposed structural wood.

Perimeter sprinkler & misting

A heat-triggered system that pre-wets your roof and perimeter as fire approaches — raising humidity and cooling embers on contact. Runs from on-site water storage, so it doesn't fail when the grid does.

Vent & Ember guards

Embers get in through vents and openings. We fit fire-resistant screening and guards to close off the gaps around eaves, crawlspaces, and structural openings the coating alone can't seal.

Seasonal maintainance & plan

We offer an annual re-inspection before fire season — checking coverage, touching up high-exposure areas, and keeping your protection current year over year.

Acreage & Commerical

Larger properties, outbuildings, fences, and strata or commercial structures are quoted as their own scope — with coverage planned across every building and boundary, not just the main house.

How It Works

From first call to protected home

No pressure, no guesswork. You'll know exactly what your home needs, what it'll cost, and what we're doing at every stage — before any work begins.

1

Free risk assesment

We walk your property with you and map it zone by zone — roof, siding, eaves, decks, vents, and the surrounding fuel. You get an honest read on where your real exposure is, in plain language.

2

Your plan & quote

We put together a written protection plan scoped to your home — core coating plus any add-ons that actually make sense for your property. Clear pricing, no obligation to proceed.

3

Prep & protection

Before a drop of coating goes on, we mask windows and fixtures and cover shrubs and plants. Careful prep is most of the craft — it's what keeps the finish clean and your landscaping unharmed.

4

Application

Our crew applies the coating by hand across every treated surface — typically three to five days for a full-size home, depending on size and prep. We keep you updated as each area is completed.

5

Walkthrough & report

We finish with a walkthrough and a record of exactly what was treated — useful for your own peace of mind, and something you can keep on file to share with your insurer.

About WILD FIRE SHIELD Service Area

Proudly Serving British Columbia

We provide professional & reliable fire-resistant coating in Fraser valley & Okanagan region. If you're in these areas, we are happy to serve you.

  • Kelowna & West Kelowna

  • Lake Country

  • Vernon

  • Penticton

  • Osoyoos

  • Oliver

  • Peachland

  • Summerland

  • Grapevine

  • Pricenton

  • Kamploops

  • Meritt

  • Williams lake

  • 100 mile house

  • Clearwater

FAQ

The questions homeowners ask

This is a new kind of service in BC, so scepticism is fair. Here is the honest version - what the coating does, what it doesn't, and how it fits your home

How is this different from painting my house?

Ordinary paint adds fuel. This coating does the opposite — under heat it expands into the surface, absorbs heat, and cuts off the oxygen a flame needs, so the fire can't take hold. When the heat passes, it contracts back to its original state, leaving the material underneath intact.

What surfaces can you treat?

The coating works best on porous materials it can expand into — wood, stucco, and fibreglass siding, plus wood and composite roof shingles. During your assessment we identify which of your surfaces are good candidates and which are better protected another way, like vent guards.

Is it safe for my family, pets and plants?

The products in this category are formulated to be low-toxicity and, in many cases, plant-safe. We'll provide the specific safety and toxicity documentation for the exact product used on your home before any work begins — nothing goes on your house that we can't show you the paperwork for.

How does the protection last?

Unlike single-use coatings that are spent after one fire, this treatment is designed to hold through multiple heat events. That said, exposure, weather, and wear vary — which is why we offer a seasonal maintenance plan to re-inspect and touch up high-exposure areas before each fire season.

How long the application take?

A full-size home typically takes three to five days, depending on square footage and how much prep is required — masking windows, covering plants, and protecting fixtures. We'll give you a firm timeline with your quote, after we've seen the property.

Does my stucco house already protect me?

Not entirely. Stucco itself doesn't burn, but under intense heat it can undergo "spalling" — trapped moisture and air cause the surface to crack and pop off, exposing the combustible wood behind it. Treating vulnerable areas closes that gap.

Does this replace firesmart?

No — it builds on it. FireSmart's guidance on clearing debris, spacing trees, and maintaining your yard is the essential foundation, and it's free. Our coating is the professional next step: hardening the materials your home is already built from, after you've done the groundwork FireSmart recommends.

What does it cost?

Cost depends on your home's size, the surfaces treated, prep required, and any add-ons — so we don't quote a flat number sight-unseen. The risk assessment is free, and you'll get clear written pricing before you decide anything. No obligation to book.

Professional wildfire coating for BC homes — the next step after FireSmart, built for the Fraser Valley and Okanagan.

Get in Touch

Copyright © WildFireShield 2026. All Rights Reserved.